RM Solar S Class 20 Pro Manuel d'instructions télécharger pdf (Page 70)

Mounting The Flashings

Mount the left hand side ashings starting with the bottom screw, use 1 x small self tapping seal

screw (4.5x35mm) at the bottom and 6 x larger sealing screws (4x80mm) up the length, ensure the

ashing runs parallel to the panel.

Mount the middle vertical ashing (for 2 or more panels) and the right hand side ashings in the

same manner.

Note: the middle apron ashing will need a 3mm pilot hole drilling on the upstand to enable the small

self tapping seal screws (5x35mm) to be tted.

Section 4 - In Roof Frame Installation

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Pas de commentaire

RM Solar S Class 20 Pro Manuel d'instructions Page 70