RM Solar S Class 20 Manuel d'instructions télécharger pdf (Page 36)

35 36

6.4.11 Panels should be 100mm from the edge of bottom ashing.

6.4.12 Mounting the upper wedge: now secure the upper wedge (7) in place using 6 x

110mm screws (In Total).

6.4.13 Connect the panels together and connect them with pipes (see chapter 5.) and

pressure test the system using either compressed air, or the glycol solution NOT

water.

6.4.14 Insert the panel temperature sensor (brown wire).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

Pas de commentaire

RM Solar S Class 20 Manuel d'instructions Page 36